The Pure Digital FiberLink 7060 series features 2 independent channels of S-Video and 4 channels of audio, either balanced or unbalanced, over 1 single mode or multimode fiber. Systems include a power supply and ST connectors for each unit. Available in 850nm, 1310nm, or 1550nm versions. 7.5 MHz video bandwidth (luminance and chrominance). Compatible with NTSC, PAL and SECAM video standards. Uses standard 4-pin mini-DIN S-Video connectors. Four independent audio channels.
Number of Channels ....................... 2 Frequency Response ...................... 7 MHz (-3 dB) Input/Output Impedance ................. 1 V p-p nom., 1.1 V p-p max. Signal-to-Noise Ratio ...................... 62 dB (CCIR weighted) Differential Gain ............................... 1% Differential Phase............................. 0.5 degree S-Video Connectors......................... 4-pin mini-DIN
Number of Audio Channels ............. 4, balanced or unbalanced Frequency Response ...................... 20 Hz - 20 kHz (-3 dB) Signal-to-Noise Ratio ...................... 85 dB Input/Output Impedance ................. 600 Ohms or 24 k Ohms balanced or unbalanced THD ................................................ 0.1% typical Audio Connectors ............................ Screw terminal block Switches ......................................... Dip switches to select input termination, balanced or unbalanced input/output. Selectable on a per-channel basis
LED Indicators ................................ Power, Video Present (per channel), Audio Present (per channel), Alarm LED (card version only) Power Requirements* ....................... 9-24 volts AC or DC, 6 watts Operating Temperature Range......... -35o to +74o C Optical Connectors ......................... ST or FCPC Operating Wavelength ..................... 850, 1310 or 1550 nm Physical Size ................................... 6.5 W x 1.15 H x 8 L (inches) 165 W x 29 H x 203 L (mm) Slots Filled in 6000A Card Cage ...... 2
